BJRTX - CTG, EPOXY-POLY SG MINT GRAY 26595 OS-11773

  • MSDS: BJRTX
  • Manufacturer: STRATHMORE PRODUCTS INC
  • Product Name: CTG, EPOXY-POLY SG MINT GRAY 26595 OS-11773
  • National Stock Number: 8010-01-277-1535
Product Identification

Product ID:CTG, EPOXY-POLY SG MINT GRAY 26595 OS-11773
MSDS Date:12/28/1990
FSC:8010
NIIN:01-277-1535
Kit Part:Y
MSDS Number: BJRTX

Responsible Party
STRATHMORE PRODUCTS INC
1970 W FAYETTE STREET
SYRACUSE, NY 13201
US

Emergency Phone: 315-488-5401, 315-476-4766

Info Phone: 315-488-5401

Cage: GO043

Contractor
STRATHMORE PRODUCTS INC
151 SYRACUSE, NY 13201 US

Telephone: (315) 488-5401 OR (315) 476-4766

Cage: GO043

Ingredients

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 5.40%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


N-BUTYL ALCOHOL (SARA III)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 5.30%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 6.20%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


METHYL PROPYL KETONE (2-PENTANONE)

CAS: 107-87-9

RTECS: SA7875000

Fraction By Weight: 8.40%

OSHA PEL 200 PPM/250 STEL

ACGIH TLV: 200 PPM/250STEL;9192


TITANIUM DIOXIDE

CAS: 13463-67-7

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192


PRLNGD/RPTD CONT OF LIQ OR BRTHG OF VAPS MAY

RTECS: 9999999ZZ


& OPEN FLAME.USE ONLY W/ADEQ VENT.AVOID BRTHG OF VAP OR

RTECS: 9999999ZZ


EMPTY CNTNERS MAY CNTN PROD RESIDUE INCLUDNG FLAMM OR

RTECS: 9999999ZZ


OR NEAR CONTAINER. ALL LABEL WARNINGS MUST BE OBSERVED

RTECS: 9999999ZZ


REPORTS HAVE ASSOC RPTD & PRLNGD OCCUPATIONAL

RTECS: 9999999ZZ


INTENTIONAL MISUSE BY DELIB CONC & INHALING THE CONTENTS

RTECS: 9999999ZZ


DRYNG & DEFAT OF SKIN WHICH MAY LEAD TO DERMAT.SKIN

RTECS: 9999999ZZ


MAY BE

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE(SHORT TERM):INHAL OF VAPS/SPRAY
MISTS CAN CAUSE IRRIT OF RESP TRACT/ACUTE NERVOUS SYS DEPRESS
CHARACTERIZED BY HDCH, DIZZ, STAG GAIT, CONFUSN, UNCON/COMA.
OVEREXP TO VAPS/SPRAY MISTS CAN CAUSE E YE & SKIN IRRIT. EYE CONT
W/LIQ MAY CAUSE SEV IRRIT. INGEST:MAY BE HARMFUL IF SWALLOWED. (SEE
EFTS OF OVEREXPOSURE)
Explanation of Carcinogenicity:TALC CONTAINING ASBESTOS FIBERS: IARC 1.
Effects of Overexposure:HLTH HAZ:CAN CAUSE GI IRRIT, NAUS, DIARRHEA &
POSSIBLY VOMIT. ASPIR OF MATL IN LUNGS CAN CAUSE PNEUM WHICH CAN BE
FATAL. CHRONIC(LONG TERM):RPTD/PRLNGD OCCUPATIONAL OVEREXP TO VAPS
MAY AFFECT THE CNS & CAUSE RESP IRRIT, AND MAY CAUSE LIVER& KIDNEY
DMG. (SEE SUPP DATA)
Medical Cond Aggravated by Exposure:EXPOSURE MAY AGGRAVATE PREEXISTING
SKIN, EYE, AND RESPIRATORY DISORDERS.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. IF BRTHG HAS STOPPED GIVE
MOUTH-TO-MOUTH RESUSCITATION & KEEP WARM & QUIET. IF BRTHG IS
DFCLT, GIVE OXYGEN. GET MD IMMED. EYES:FLUSH IMMED W/COPIOUS QTYS
OF WATER FOR 15 MIN & TAKE TO MD FOR DEFINITIVE MED TREATMENT.
SKIN:REMOVE CONTAM CLTHG AND WASH AFFECTED AREA W/SOAP AND WATER.
IF IRRIT PERSISTS, SEE MD. INGEST:DO NOT INDUCE VOMIT; CALL
MD/POISON CONTROL CTR IMMED.

Fire Fighting

Flash Point Method:SCC
Flash Point:40.0F,4.4C
Lower Limits:SEE INGRED
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEMICAL OR ALCOHOL FOAM) DESIGNED TO EXTING NFPA CLASS 1B LIQ
FIRES.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROT
EQUIP. REMOVE ANY SOURCES OF IGNIT. WATER MAY BE USED TO COOL
UNRUPTURED CLOSED CNTNRS TO PREVENT (SEE SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLOSED. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS & OPEN FLAME. CLOSED CNTNRS MAY EXPLODE
WHEN EXPOS TO EXTREME HEAT. DO NOT APPLY TO HOT SURF.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT (FLAMES, HOT
SURFACES & ELEC, STATIC/FRICTION SPARKS). AVOID BRTHG VAPS. VENT
AREA. REMOVE W/INERT ABSORB & NON-SPARKING TOOLS. TRANSFER TO
APPROP CNTNR FOR DISP. KEEP OUT OF SEWERS, STORM DRAINS, SURFACE
WATER & SOIL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS 1B FLAMMABLE LIQUIDS.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. DO NOT
FLAME CUT, BRAZE OR WELD WITHOUT NIOSH/MSHA APPRVD RESP OR APPROP
VENT. WARNING:FLAMM. VAP HARMFUL. MAY CAUSE EYE BURNS. MAY CAUSE
IRRIT. HEATING FOR MS HAZARDOUS VAP. (SEE INGRED 7)

Exposure Controls

Respiratory Protection:OUTDOOR/OPEN AREAS - NIOSH/MSHA APPRVD MECH
FILTER RESP TO REMOVE AIRBORNE PARTICLES OF OVERSPRAY. RESTRICTED
VENT AREAS - CHEM MECH FILTER TO REMOVE A COMB OF PARTICULATE &
VAP. CONFINED AREAS - AIR LINE TYPE RESP OR HOODS.
Ventilation:GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO KEEP
TLV/LEL< LIM, & REMOVE DECOMP PRODS DURING WELDING/FLAME CUTTING.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Work Hygienic Practices:WASH HANDS FREQUENTLY AND THOROUGHLY DURING
CONTACT WITH MATERIAL AND AT END OF WORKDAY .
Supplemental Safety and Health
FIRE FIGHT PROC:PRESSURE BUILDUP AND POSSIBLE AUTO-IGNITION OR
EXPLOSION WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG
NOZZLES ARE PREFERABLE. EFTS OF OVEREXP:A CASE EFFECT SHOWED ACTIVE
LIVER & KIDNEY DYSFUNCTION AT EXTREMELY HIGH LEVELS OF EXPOSURE TO
XYLENE AND TOLUENE. (SEE INGRED 11)

Chemical Properties

Boiling Pt:B.P. Text:175F,79C
Vapor Pres:SEE INGRED
Vapor Density:>AIR
Spec Gravity:1.54
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:49.8

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION WITH ALKALINES, STRONG ACIDS.
Stability Condition to Avoid:EXCESSIVE HEAT, SPARKS, OPEN FLAME.
Hazardous Decomposition Products:ACRID FUMES, SMOKE AND CARBON MONOXIDE
AND/OR CARBON DIOXIDE.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.